Displaying 1 - 10 results of 28 for ""
Published: May 2019
Category:
Pavement & surfacing
,
Specifications
| Audiences:
General,
Road traffic engineers & consultants,
Roading contractors
Guidelines for pavement specifications for primary cycling routes including cycle lanes and cycle paths, shared paths and separated cycleways, as well as pavement shoulders where cycling demand is high and where a high level of service is desired.
Published: 2000
Category:
Construction
,
Pavement & surfacing
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
These notes provide guidance for the engineer to aid in their decision to reject or accept a material proposed for use a basecourse or sub-bases used on state highways and other roadways constructed in accordance with TNZ B/3 performance based specif…
Published: July 2023
Category:
Construction
,
Pavement & surfacing
,
Specifications
| Audiences:
Road controlling authorities,
Roading contractors
The NZTA B10 Specification for Hi-Lab design, production and construction (version 1) and Notes (version 1) has been developed and published.
Published: 1981
Category:
Construction
,
Pavement & surfacing
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
Specification and guidance notes for the supply of aggregate by weight.
Published: 1986
Category:
Construction
,
Pavement & surfacing
,
Specifications
| Audiences:
Road controlling authorities,
Road traffic engineers & consultants
Guidance notes provided as there is no standard TNZ M/3 Specification for sub-base aggregate.
Published: 2000
Category:
Construction
,
Pavement & surfacing
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification and guidance notes sets out design, maintenance and performance requirements of the surfacing and unbound flexible pavement layers for the construction of new pavements and re-construction of existing pavements.
Published: 5 August 2022
Category:
Material
,
Pavement & surfacing
,
Specifications
| Audience:
Roading contractors
This Q05 specification has been developed to set out the standard processes required by Waka Kotahi so that assurance can be provided that bitumen of acceptable quality is imported into New Zealand and applied to road pavement surfacings.
Published: 16 January 2020
Category:
Pavement & surfacing
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
T19 specification sets out procedures for determining an optimised blend of aggregate and binders for the stabilisation of pavements.
Published: 1/01/2020
Category:
Pavement & surfacing
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
T19 specification sets out procedures for determining an optimised blend of aggregate and binders for the stabilisation of pavements.
Published: 16 January 2020
Category:
Application
,
Pavement & surfacing
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification shall apply to the in-situ stabilisation of subgrade layers comprising either natural in situ soils, imported fill materials or a combination of both using cement, lime or a combination of these.