Incorporated by reference
Incorporated by reference
|Section/standard||Title||Source of material||Version||View the material||Free of charge?
|Australian Design Rule 2,||Side Door Latches and Hinges;||Department of Infrastructure and Transport (Australia)||Applicable version varies depending on year of manufacture and type of vehicle. Contact the NZTA Vehicles Unit if assistance is required.||www.infrastructure.gov.au/roads/motor/design/adr_online.aspx||Y|
|Council Directive 70/387/EEC||Council Directive 70/387/EEC of 26 July 1971 on the approximation of the laws of the Member States relating to the doors of motor vehicles and their trailers;||European Commission (EU)||Applicable version varies depending on year of manufacture and type of vehicle. Contact the NZTA Vehicles Unit if assistance is required.||http://eur-lex.europa.eu/RECH_naturel.do
for consolidated text.
|Federal Motor Vehicle Safety Standard No. 206 (49CFR571.206)||Door Locks and Door Retention Components - Passenger Cars, Multipurpose Passenger Vehicles, and Trucks;||Department of Transport (USA)||Applicable version varies depending on year of manufacture and type of vehicle. Contact the NZTA Vehicles Unit if assistance is required.||www.access.gpo.gov/nara/cfr/cfr-table-search.html#page1||Y|
|UN/ECE Regulation No. 11,||Uniform provisions concerning the approval of vehicles with regard to door latches and door retention components (E/ECE324-E/ECE/TRANS/505/Add.10);||United Nations Economic Commission for Europe||http://live.unece.org/trans/main/wp29/wp29regs.html||Y|
|Low Volume Vehicle Code,||Low Volume Vehicle Code,||Low Volume Vehicle Technical Association||www.lvvta.org.nz/documents.html#standards
Hard copy available for viewing at NZTA Library.
|Technical Standard for Door Retention Systems (Japan).||Technical Standard for Door Retention Systems (Japan).||Japan Automobile Standards Internationalization Center (JASIC) in the Automobile Type Approval Handbook for Japanese Certification.||Hard copy available for viewing at NZTA Library.||N|
|ADR||Australian Design Rule|
|ANSI||American National Standards Institute|
|EEC, EC||European Economic Community, European Communities|
|FMVSS||Federal Motor Vehicle Safety Standard|
|IMDG||International Maritime Dangerous Goods Code|
|JIS||Japanese Industrial Standard|
|LTSA||Land Transport Safety Authority of New Zealand|
|MoT||Ministry of Transport, New Zealand|
|NZS||New Zealand Standard|
|SABS||South African Bureau Standards|
|SAE||Society of Automotive Engineers|
|UN/ECE||United Nations Economic Commission for Europe|
|UNRTDG||United Nations Recommendations on the Transport of Dangerous Goods – Model Regulations|