Resources

This specification and guidance notes applies to the correction of settlement deformation, including depressions and wheel path rutting and settlement due to surface openings in surfaced roads.

This specification and guidance notes set out the requirements for crack sealing, repair of scabbing, stripping and bleeding, and the second coat sealing of pavement repairs.

Specification and guidance notes for the supply of aggregate by weight.

Guidance notes provided as there is no standard TNZ M/3 Specification for sub-base aggregate.

This specification and guidance notes sets out design, maintenance and performance requirements of the surfacing and unbound flexible pavement layers for the construction of new pavements and re-construction of existing pavements.

This Q05 specification has been developed to set out the standard processes required by Waka Kotahi so that assurance can be provided that bitumen of acceptable quality is imported into New Zealand and applied to road pavement surfacings.

This P49 specification outlines the requirements for implementation of the Waka Kotahi Sustainability Rating Scheme Policy.

This P47 specification covers the minimum environmental, social and cultural management requirements for state highway improvement projects (capital works).

These specifications must be met where a vehicle inspector chooses to use a noise meter to assess exhaust noise as part of the WoF inspection.

This specification describes the application of coloured surfacings for use on roads, cycle ways.